- Only suitable for engine diagnostics in all OBD2 systems
- Not suitable for any commercials
- Not suitable for OBD1 systems
- Only for 12 volt systems
1. Works with cars that have the OBD2 system including CAN system
2. Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light
3. Supports multiple trouble code requests: generic codes, pending codes and manufacturer- s specific codes
4. Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
5. Highly reliable and accurate
6. Easy-to-read crystal-clear backlit 2-line LCD display
7. Easy to use with one plug-in
8. Stand-alone unit with no need for an additional laptop computer to operate
9. Small in size and conveniently fits in your palm
10. Performs continuous DTC scan
11. Safely communicates with the on-board computer
12. No batteries needed-powered via detachable OBD II cable
13. One-year warranty
1. Saves time and money on repairs- find out what's wrong prior to repairing and verify a repair after servicing
2. Wider vehicle coverage with CAN Protocol support
3. Turns off check engine light(MIL), Erases Diagnostic Trouble Codes (DTCs) and resets OBD2 monitor status
4. More features for less-Reviews the emission readiness status of OBD monitors, retrieves VIN on OBD2 vehicles, and more
5. Determines the malfunction indicator lamp (MIL) status
6. Keeps engine performance in good shape with regular inspections and prevents future costly repairs
7. Helps to identify problems with a used vehicle before buying or selling
Will This Code Reader Work with My Car-
The U480 OBD2 Code Reader is specially designed to work with most OBD II compliant vehicles. It is required within USA that all 1996 and newer vehicles must be OBD2 compliant and this includes all Domestic, Asian and European vehicles. OBD was adopted in Europe in petrol cars from 2001 and in diesel cars from 2004.
A small number of 1994 and 1995 USA petrol models are OBD2 compliant. To verify if a 1994 or 1995 vehicle is OBD2 compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the bonnet or by the radiator of most vehicles. If the vehicle is OBD2 compliant, the label will designate - OBD II Certified- . Additionally, Government regulations mandate that all OBD2 compliant vehicles must have a common sixteen-pin Data Link Connector (DLC).
For your vehicle to be OBD II compliant, it must have a 16 pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. This label is located on the inside of the bonnet (hood) on most vehicles.
All OBD2 Vehicles
How to Use
1. When your "Check Engine" light or "Service Engine Soon" or - Check- light is on, stop the car and apply the parking brake, switch on the ignition and then plug the code reader to the 16-pin diagnostic socket (universal connector) usually located under the instrument panel in the car.
2. Push the Read button and it automatically gets the Diagnostic Trouble Codes (DTCs) if any in less than 10 seconds.
3. Identify the trouble codes and retrieve their detailed descriptions by looking up the Diagnostic Trouble Codes (DTCs) list in the enclosed user manual.
- Alfa Romeo
- Aston Martin
- Land Rover
- Lea Francis
- New Holland
- Range Rover
- Robin Hood
2 - 9 Units: $22.22
10 - 24 Units: $21.22
25 - 49 Units: $20.36
50 - 99 Units: $18.99
100 - 249 Units: $17.65
250 - 499 Units: $16.72
500 - 999 Units: $16.72
1000+ Units: $36.66