BMW AD HITAG 2

Universal Key Programmer

Details:

This is a universal key programmer with the additional option of key programming from dump. Just insert a blank key or an appropriate transponder you need to program. This device detects the transponder type and will do everything automatically. Program a key or transponder to BMW cars fitted with the CAS module. The programming key is required to have read the eeprom of the immobiliser, load into the software to specify what position you want to program this key or transponder and then modify the eeprom dump and program it into the immobiliser.

BMW AD OBDII Connector uses the K line and the CAN BUS system.  It is ok for the BMW DASH /BMW INPA K+CAN /BMW SCANNER 1.40

Features:
Widest range of supported cars, using Hitag2 protocol
ALL types of Hitag2 transponders are fully supported

Supported transponder modes:
Password mode
Crypto mode

Transponder types list:
PCF 7936
PCF 7941
PCF 7942/44
PCF 7943                    
PCF 7945
PCF 7946
PCF 7947
PCF 7952

Supported protocols:

Manchester
Biphase

Key generation from dump is available for the following cars:

BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512

Supports matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control

Models covered:

1 Series: E81/E82/E87/E88
3 Series: E30/E36/E46/E90/E91/E92/E93
5 Series: E28/E34/E39/E60/E61
6 Series: E24/E63/E64
7 Series: E23/E32/E38/E65
8 Series: E31
X Series: X3-E83, X5-E53, X5-E70, X5-E71
Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52
MINI Series: MINI-R50/R52/R53/R55/R56/R57

All systems of BMW series and OBD-II diagnostic system:  

Engine system
Auto Transmission
SRS
ABS
Cruise system
Air-condition system
EWS
LKE
BUS etc

IMPORTANT: NEVER use Jump Leads, Start Booster or other sources of External Power while tester is connected to diagnostic socket because it will damage the diagnostic Main Unit