U581 Code Reader for OBD2 systems

- This tool can only be used to connect to OBD2 systems for engine diagnostics

- Not suitable for any commercials 

- Only for 12 volt systems

Features:

-Vehicles in the USA have been OBD2 compliant since 1996 by law.
-This was not the case in Europe until 2001 for Petrol vehicles and 2004 for Diesel Vehicles,

A few Manufacturers were OBD2 compliant earlier in Europe, however if you are unsure if this will work with your vehicle please contact your vehicle manufacturer prior to purchase, or contact us and we will do our best to advise.

-Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs)
-Trouble codes displayed on the LCD
-No need to refer to a code book
-Scanning live data
-Reading Freeze Frame Data
-Testing I/M Reading Status
-Reading vehicle info
-Rescanning Data

Description:
1.LCD Display, 128*64 pixel display with contrast adjustment, Backlit
2. Enter key selects displayed
3. Exit key go back to the previous screens
4. Up/down arrows-moves the selection pointer and scrolls up or down.
5. LEFT/RIGHT arrows-Select responses and moves cursor.
6. OBDII connector cable, connect car and the scan tool
7. Battery compartment
 

Specifications:
- Display-Backlit LCD, 128*64 pixel display.
- Operating Temperature- 0 to 50
- Internal Power- 9v Cell
- External Power: 10.0 to 15.5 volts provided via vehicle battery
- Update by internet
 

Dimensions:
- 195mm Length 81mm Width 32mm Height
- OBDII connector, 1500mm