Our Products

Find Your Car

shared_ask

shared_delivery

launch crp429 (3)Click to enlarge product image
launch crp429 (3)

Launch CRP 429 Multi Systems

  • No reviews yet
  • Not available
  • FREE shipping with all 1 piece samples

    Please click on the wholesale price tab for even lower prices.

 

 

NEW LAUNCH CRP 429 MULTI SYSTEMS

 

FOR OBD2 DIAGNOSTIC SYSTEMS

See our FAQ page for information about OBD2

 

 

    launch crp429 (1)

 

launch crp429 (2)

Multi Systems Diagnostics 

1. Read many different DTCs from vehicle’s control systems to locate problem areas 

2. Erase the codes easily after DTCs retrieving and when repairs have been carried out;

3. Live data of each parameter item displayed in analog, text, waveform graph, digital, or full screen display modes;

 

Professional Functions 

( Please note that NO tool does everything in every car )  As a rule: The more you pay the more you get

Oil Reset Service – If you got an oil lamp on the dashboard, you can finish oil change and use the scan tool to reset the vehicle service mileage for the engine oil life system;

EPB Service –EPB calibration is to maintain the electronic braking systems safely and effectively, which should be performed after real work has been completed on the EPB or vehicle braking system;

SAS Service –SAS reset is used to clear the stored memories of replaced steering angle sensor when the replacement or the calibration of steering angle sensor is completed;

ABS Bleeding – When your brake pedal becomes soft and inconvenient to control, this diagnostic tool can perform bi-directional tests to check the Anti-lock Braking System;

BMS Service – After finishing Battery change, you can use this scanner to clear the fault memory of original battery and perform the battery matching;

DPF Regeneration –This function is mainly used for diesel to efficiently purify 70%-90% particles in the exhaust by reset the temperature to a certain value;

IMMO Service – If you lost your key, this diagnostic tool can add new keys and delete the keys via reading vehicle information to match the password of anti – theft.;

Injector Coding – make the cylinder better identify injector after ECU or injector is replaced.

 

 

launch crp429 main

 

Basic OBD2 Functions

1. Read Codes – read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes;

2. Clear Codes – clear detected trouble codes and turn off the MIL/Check Engine Light;

3. Live Data – view graphically real-time parameters of vehicle’s computer modules;

4. Freeze Frame – view the vehicle’s operating parameters when a DTC is detected;

5. I/M Readiness Status – have a vehicle inspected before the State Emissions Test;

6. O2 Sensor Test – check the oxygen sensors for fuel efficiency and emissions;

7. On-board Monitor Test – determine if each monitor is OK by comparing values;

8. Component Test – initiate a leak test for EVAP system to test components or modules;

9. Vehicle Information – retrieve the vehicle information of VIN, CINs, and CVNs.

 

 

launch crp429 (3)

 

launch crp429 (5)

launch crp429 (10)

 

Launch crp429 (6)

launch crp429 (7)

 

Supported Brands


Hyundai, Daewoo, KIA, Chrysler, Dodge, Jeep, GM, Buick, Cadillac, Chevrolet, AUDI, SAAB, SEAT, SKODA, SMART, BMW, Mini Cooper, BMW-Brilliance, Rolls-Royce, Porsche, Benz, Maybach, Peugeot, Volkswagen, Bentley, Bugatti, Fiat, Abbas, Lancia, Alfa Romeo, Fiat, Volvo, Renault, DACIA, Landrover, Jaguar, Citroen, Opel, Opel South Africa, Vauxhall, Isuzu Japan, Isuzu Thailand, SUBARU, TOYOTA, TOYOTA China, Lexus, SUZUKI, Mazda, NISSAN, Infiniti, Nissan, Lincoln, Ford, Acura, Honda, JAGUAR

 

launch crp 429 cars

 

Specifications

Operating System: Android 7.0

Processor: Cortex-A5 processor (1.5 GHz)

RAM: 1GB

ROM: 8GB

Display: 5 inch IPS touch screen

Connectivity: Mini USB 2.0

USB 2.0

Wi-Fi

Micro SD card (supports up to 32GB)

Power and Battery: 4000 mAh lithium-polymer battery

Charges via DC 5 V/OBD2 16-pin 12V/Android Micro UBS power supply

Tested Battery Life: Around 4.5 hours of continuous use

Battery Charging Input: 5 V/ 1.5 A

Working temperature: -10 to 50°C (14 to 122 F°)

Dimensions (W * H * D): 248.7mmx93.5mmx36mm

Net Weight: 530 g (1.17 lb.)

 

What's in the box? 

1 * Main Unit

1 * OBDII Diagnostic Cable

1 * DC 5V Charging Cable

1 * Product User’s Manual

1 * Padded Carry Case

 

Please call for full details on compatible vehicles

1 Unit: $424.47
2 - 9 Units: $353.72
10 - 24 Units: $0.00
25 - 49 Units: $0.00
50 - 99 Units: $0.00
100 - 249 Units: $0.00
250 - 499 Units: $0.00
500 - 999 Units: $0.00
1000+ Units: $424.47
  • *
  • *
  • *
  • *
  • Send to Friend

Related products you may be interested in...